Try Kubernetes

Reference Documentation

Design docs, concept definitions, and references for APIs and CLIs.

Documentation for Kubernetes v1.5 is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.

Edit This Page

Ingress Resources

Terminology

Throughout this doc you will see a few terms that are sometimes used interchangeably elsewhere, that might cause confusion. This section attempts to clarify them.

What is Ingress?

Typically, services and pods have IPs only routable by the cluster network. All traffic that ends up at an edge router is either dropped or forwarded elsewhere. Conceptually, this might look like:

    internet
        |
  ------------
  [ Services ]

An Ingress is a collection of rules that allow inbound connections to reach the cluster services.

    internet
        |
   [ Ingress ]
   --|-----|--
   [ Services ]

It can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc. Users request ingress by POSTing the Ingress resource to the API server. An Ingress controller is responsible for fulfilling the Ingress, usually with a loadbalancer, though it may also configure your edge router or additional frontends to help handle the traffic in an HA manner.

Prerequisites

Before you start using the Ingress resource, there are a few things you should understand. The Ingress is a beta resource, not available in any Kubernetes release prior to 1.1. You need an Ingress controller to satisfy an Ingress, simply creating the resource will have no effect.

GCE/GKE deploys an ingress controller on the master. You can deploy any number of custom ingress controllers in a pod. You must annotate each ingress with the appropriate class, as indicated here and here.

Make sure you review the beta limitations of this controller. In environments other than GCE/GKE, you need to deploy a controller as a pod.

The Ingress Resource

A minimal Ingress might look like:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: test-ingress
spec:
  rules:
  - http:
      paths:
      - path: /testpath
        backend:
          serviceName: test
          servicePort: 80

POSTing this to the API server will have no effect if you have not configured an Ingress controller.

Lines 1-4: As with all other Kubernetes config, an Ingress needs apiVersion, kind, and metadata fields. For general information about working with config files, see here, here, and here.

Lines 5-7: Ingress spec has all the information needed to configure a loadbalancer or proxy server. Most importantly, it contains a list of rules matched against all incoming requests. Currently the Ingress resource only supports http rules.

Lines 8-9: Each http rule contains the following information: A host (e.g.: foo.bar.com, defaults to * in this example), a list of paths (e.g.: /testpath) each of which has an associated backend (test:80). Both the host and path must match the content of an incoming request before the loadbalancer directs traffic to the backend.

Lines 10-12: A backend is a service:port combination as described in the services doc. Ingress traffic is typically sent directly to the endpoints matching a backend.

Global Parameters: For the sake of simplicity the example Ingress has no global parameters, see the api-reference for a full definition of the resource. One can specify a global default backend in the absence of which requests that don’t match a path in the spec are sent to the default backend of the Ingress controller.

Ingress controllers

In order for the Ingress resource to work, the cluster must have an Ingress controller running. This is unlike other types of controllers, which typically run as part of the kube-controller-manager binary, and which are typically started automatically as part of cluster creation. You need to choose the ingress controller implementation that is the best fit for your cluster, or implement one. Examples and instructions can be found here.

Before you begin

The following document describes a set of cross platform features exposed through the Ingress resource. Ideally, all Ingress controllers should fulfill this specification, but we’re not there yet. The docs for the GCE and nginx controllers are here and here respectively. Make sure you review controller specific docs so you understand the caveats of each one.

Types of Ingress

Single Service Ingress

There are existing Kubernetes concepts that allow you to expose a single service (see alternatives), however you can do so through an Ingress as well, by specifying a default backend with no rules.

ingress.yaml 
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: test-ingress
spec:
  backend:
    serviceName: testsvc
    servicePort: 80

If you create it using kubectl create -f you should see:

$ kubectl get ing
NAME                RULE          BACKEND        ADDRESS
test-ingress        -             testsvc:80     107.178.254.228

Where 107.178.254.228 is the IP allocated by the Ingress controller to satisfy this Ingress. The RULE column shows that all traffic send to the IP is directed to the Kubernetes Service listed under BACKEND.

Simple fanout

As described previously, pods within kubernetes have IPs only visible on the cluster network, so we need something at the edge accepting ingress traffic and proxying it to the right endpoints. This component is usually a highly available loadbalancer. An Ingress allows you to keep the number of loadbalancers down to a minimum, for example, a setup like:

foo.bar.com -> 178.91.123.132 -> / foo    s1:80
                                 / bar    s2:80

would require an Ingress such as:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: test
spec:
  rules:
  - host: foo.bar.com
    http:
      paths:
      - path: /foo
        backend:
          serviceName: s1
          servicePort: 80
      - path: /bar
        backend:
          serviceName: s2
          servicePort: 80

When you create the Ingress with kubectl create -f:

$ kubectl get ing
NAME      RULE          BACKEND   ADDRESS
test      -
          foo.bar.com
          /foo          s1:80
          /bar          s2:80

The Ingress controller will provision an implementation specific loadbalancer that satisfies the Ingress, as long as the services (s1, s2) exist. When it has done so, you will see the address of the loadbalancer under the last column of the Ingress.

Name based virtual hosting

Name-based virtual hosts use multiple host names for the same IP address.

foo.bar.com --|                 |-> foo.bar.com s1:80
              | 178.91.123.132  |
bar.foo.com --|                 |-> bar.foo.com s2:80

The following Ingress tells the backing loadbalancer to route requests based on the Host header.

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: test
spec:
  rules:
  - host: foo.bar.com
    http:
      paths:
      - backend:
          serviceName: s1
          servicePort: 80
  - host: bar.foo.com
    http:
      paths:
      - backend:
          serviceName: s2
          servicePort: 80

Default Backends: An Ingress with no rules, like the one shown in the previous section, sends all traffic to a single default backend. You can use the same technique to tell a loadbalancer where to find your website’s 404 page, by specifying a set of rules and a default backend. Traffic is routed to your default backend if none of the Hosts in your Ingress match the Host in the request header, and/or none of the paths match the url of the request.

TLS

You can secure an Ingress by specifying a secret that contains a TLS private key and certificate. Currently the Ingress only supports a single TLS port, 443, and assumes TLS termination. If the TLS configuration section in an Ingress specifies different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension (provided the Ingress controller supports SNI). The TLS secret must contain keys named tls.crt and tls.key that contain the certificate and private key to use for TLS, e.g.:

apiVersion: v1
data:
  tls.crt: base64 encoded cert
  tls.key: base64 encoded key
kind: Secret
metadata:
  name: testsecret
  namespace: default
type: Opaque

Referencing this secret in an Ingress will tell the Ingress controller to secure the channel from the client to the loadbalancer using TLS:

apiVersion: extensions/v1beta1
kind: Ingress
metadata:
  name: no-rules-map
spec:
  tls:
    - secretName: testsecret
  backend:
    serviceName: s1
    servicePort: 80

Note that there is a gap between TLS features supported by various Ingress controllers. Please refer to documentation on nginx, GCE, or any other platform specific Ingress controller to understand how TLS works in your environment.

Loadbalancing

An Ingress controller is bootstrapped with some loadbalancing policy settings that it applies to all Ingress, such as the loadbalancing algorithm, backend weight scheme etc. More advanced loadbalancing concepts (e.g.: persistent sessions, dynamic weights) are not yet exposed through the Ingress. You can still get these features through the service loadbalancer. With time, we plan to distill loadbalancing patterns that are applicable cross platform into the Ingress resource.

It’s also worth noting that even though health checks are not exposed directly through the Ingress, there exist parallel concepts in Kubernetes such as readiness probes which allow you to achieve the same end result. Please review the controller specific docs to see how they handle health checks (nginx, GCE).

Updating an Ingress

Say you’d like to add a new Host to an existing Ingress, you can update it by editing the resource:

$ kubectl get ing
NAME      RULE          BACKEND   ADDRESS
test      -                       178.91.123.132
          foo.bar.com
          /foo          s1:80
$ kubectl edit ing test

This should pop up an editor with the existing yaml, modify it to include the new Host.

spec:
  rules:
  - host: foo.bar.com
    http:
      paths:
      - backend:
          serviceName: s1
          servicePort: 80
        path: /foo
  - host: bar.baz.com
    http:
      paths:
      - backend:
          serviceName: s2
          servicePort: 80
        path: /foo
..

saving it will update the resource in the API server, which should tell the Ingress controller to reconfigure the loadbalancer.

$ kubectl get ing
NAME      RULE          BACKEND   ADDRESS
test      -                       178.91.123.132
          foo.bar.com
          /foo          s1:80
          bar.baz.com
          /foo          s2:80

You can achieve the same by invoking kubectl replace -f on a modified Ingress yaml file.

Failing across availability zones

Techniques for spreading traffic across failure domains differs between cloud providers. Please check the documentation of the relevant Ingress controller for details. Please refer to the federation doc for details on deploying Ingress in a federated cluster.

Future Work

Please track the L7 and Ingress proposal for more details on the evolution of the resource, and the Ingress repository for more details on the evolution of various Ingress controllers.

Alternatives

You can expose a Service in multiple ways that don’t directly involve the Ingress resource:

Analytics

Create an Issue Edit this Page